This Cyclone Feed System Package includes both the TechT Vortex Mod and Lightening Rod together. Get both items at the same time to make install easier and max out your cyclone system. Will fit all Tippmann markers that have the Tippmann cyclone feed system installed including the Tippmann A-5 Paintball Gun, Tippmann X7 Paintball Gun and Tippmann 98 Paintball Guns. Will not work on Non cyclone 98 markers.

TechT Vortex Mod Description:

The Vortex Mod is for those looking to have the fastest and most reliable cyclone feed available. Initially TechT was looking to make parts that were just more durable than the stock plastic internals. However, through testing, they started to realize that they could, and should, actually make higher performing parts. The result was awesome!!!

TechT Vortex Mod Features:

• This upgrade makes the cyclone loader work at lower pressures. During testing TechT ran the A5 until it ran out of air. The result was that the loader continued to load balls all the way down to 100-150 psi. At that point, the gun stopped re-cocking. Understand that results will vary a bit based on the condition of your cyclones internal o ring, and how well its lubricated. But know that it will feed at lower pressures.
• Typically the stock parts stop loading balls at about 350-400 lbs. That's enough pressure to still shoot about 200fps, but you are forced to manually feed each ball by hand. With the Vortex Mod, you're cyclone will keep you in the game longer.
• It makes sense that if the parts make it so the loader takes less air to work, that they also could make the loader work faster. TechT tested one of the new Tippmann 98 Pro-E with ACT (anti-chop technology) with a standard Halo, Empire Reloader B, Standard Cyclone, and a Cyclone feed with a Vortex Mod. They doubted that any loader would keep up to 25 bps, but because the gun had the ACT "jam bolt" it was safe to out shoot the loader without having to worry about chopping paint. After shooting about 500 rounds through the gun with each hopper the results were conclusive. The standard halo would feed 4-5 shots, and then stop loading. The Empire Reloader B fed about 7-10 shots and then stopped loading. The Standard Cyclone fed about 10-15 shots and then stop loading, and the Vortex Mod would shoot nice long streams of paint and only a skip a couple balls.
• So, if you are sick of buying replacement internals for your Cyclone Feed, and you want the most durable, efficient, and fastest parts available, these little beauties are for you. These parts are made of anodized aluminum and come with a 1 year warranty through TechT.
• Kit includes all pins and screws you will need, however you will need the stock springs for the ratchet.

TechT Lightening Rod Features:

• The Lightening Rod is our latest modification for increasing the performance of your Tippmann Cyclone Feed.
• The Lightening Rod is designed to work in conjunction with our Vortex Mod, and together, the two parts will yield higher rates of fire- approximately 30 BPS!
• The secret to the performance gains is the sealed roller bearing located where the ratchet and piston rod met. The bearing is not visible in this picture, but will be in pictures to come.
• The Lightening Rod is made of anodized billet aluminum, and the bearing is a sealed swiss bearing.
• The Lightening Rod lowers the operating pressure of the Cyclone feed by 100 psi. When used with the Vortex Mod a player can obtain the lowest possible operating pressure for the Cyclone Feed.
• This is the next step in making your cyclone even faster and more efficient!!!